After I update firmware NAC to 21.08.25.12_NAC-r0 bug with to logo on boot go out and logo in app screen change to Peugeot
Tell me please, what for change VIN in NAC when I install used NAC from other car?
In other words change VIN not need after change calibrations? I am right?Restore the 508 config provided on the forum to have a clean start, then tweak it steps by steps.
I can also share configuration from RCC in Toyota Proace
I have readed SW version on it:
HMI 21.616.53.17.00
iMX x0101185_171122_16.1B116
V850 W2.1_16.1S723
I try to find information for which HW version is this SW but i couldn't find clear info if its RCC A1 or A2.
Thanks
In other words change VIN not need after change calibrations? I am right?
Answer is here
Sorry, maybe aim blind or it is something obvious for you but not for me.
Non of those numbers look similar to those provided under your link.
HMI 21.616.53.17.00
iMX x0101185_171122_16.1B116
V850 W2.1_16.1S723
Thanks
edit
Ok, its most probably A2 because lower in this post https://www.forum-peugeot.com/Forum/threads/carplay-activable.117254/#post-2500569 obd user is sharing screen with this version on RCC A2.
So this is good news. Thanks
Super propre la réalisation du circuit impriméBonsoir,
Merci à vous pour cet excellent Tuto..
J'ai pu réaliser le montage grâce à vos explications, et ÇA MARCHE !
Je joints quelques photos.
Mon "rêve" serait de pouvoir activer le Park Assist... Et d'installer la Caméra AVANT !
A suivre...
Encore merci à VLud et Bagou91 !
Bonne route à tous.
Voir la pièce jointe 15910 Voir la pièce jointe 15911 Voir la pièce jointe 15912 Voir la pièce jointe 15914Voir la pièce jointe 15913
J'ai une question:
Avec cette application, serait-il possible de forcer l'écran de 12 "d'un picasso à thème smeg à être reconfiguré avec des thèmes nac?
Bonsoir,
Merci à vous pour cet excellent Tuto..
J'ai pu réaliser le montage grâce à vos explications, et ÇA MARCHE !
Je joints quelques photos.
Mon "rêve" serait de pouvoir activer le Park Assist... Et d'installer la Caméra AVANT !
A suivre...
Encore merci à VLud et Bagou91 !
Bonne route à tous.
Voir la pièce jointe 15910 Voir la pièce jointe 15911 Voir la pièce jointe 15912 Voir la pièce jointe 15914Voir la pièce jointe 15913
@VLud : "N'hésite pas à nous partager ta config C5 "
Ok, mais dites-moi ce qu'il faut faire...
J'ai vu ce post :
https://www.forum-peugeot.com/Forum/threads/base-de-données-des-calibrations-télématique.118960/
C'est ça ?
Quant à mon fichier *.nac, il est bien plus petit que ceux que j'ai vus sur la 1ère page de ce post !
A+