Try to uncheck "new type obstacle detection system" in Zone 2133. Helped for me -> had the same issue
best regards fredi309 from austria
Dernière édition:
[TUTO] Télécodage et calibration d'un NAC / RCC / CIROCCO / CMB_NUM SANS Diagbox via Arduino
- Démarrée par VLud
- Date de début
Try to uncheck "new type obstacle detection system" in Zone 2133. Helped for me -> had the same issue
best regards fredi309 from austria
No that's not possible, I think it's possible to deactivate it temporarly, but it will turn on again
Still not working
was already unchecked, turned it on, then off and nothing…What option do you have checked in the BSI? zone 2300
I have 13 or 33, cant remember. If i am right, this says that i have a PDC module with front sensors as well, and I dont. Maybe this is the reason? I find it odd, since it switches to zoom mode when i have an obstacle in the rear
Thanks!
Also, if @VLud is around and has any idea too... thanks!
Dernière édition:
Szia, @Futee nem akartam hinni a szememnek mikor meglattam a magyar nyelvu irast
Fel tudnam venni a kapcsolatod veled valahogy? Kuldesz egy uzenetet az email cimemre? :[email protected]Koszonom
Dernière édition:
Hi, @ezeyhomero can you PM me please because i can't. I need some help with activaton of park assist. Thank yopu
Hello. I have a 2021 peugeot 208 gt car. Blind spot assist is available. I want to enable automatic parking and grip control features. I looked at the Arduino coding schemes, but I couldn't quite understand it. I would appreciate if you explain how to write the codes.
Bonjour @VLud
j'ai pris fichier calibration 208_I-9693364380.cal j'ai calibrer nickel sauf que j'ai plus de défaut ?
j'avais défaut colmatage FAP est ABS ESP défaillant j'ai plus ces alertes en plus le son des clignotants
a changer et le son retirer la clé a changer aussi je trouve sa bizarre
Merci d'avance
j'ai pris fichier calibration 208_I-9693364380.cal j'ai calibrer nickel sauf que j'ai plus de défaut ?
j'avais défaut colmatage FAP est ABS ESP défaillant j'ai plus ces alertes en plus le son des clignotants
a changer et le son retirer la clé a changer aussi je trouve sa bizarre
Merci d'avance
Says that calibration file is invalid. I think its for gen 1 cactus. I got the other one (2018+)
Tried today various options and menus to see if there is some option telling if the car is moving. None. But wheel angle is detected (guide is moving). No sense…
Dernière édition:
Hello again, has anyone tried to code the sports button using Arduino?
I assume we need to code inside the ESP, and maybe also whatever ECU that handles the speeder pedal, as those two items seems to be the only thing that is affected by having the sports button turned on. A more firm steering wheel and a increased pedal responsiveness.
Thanks to anyone who replies
I assume we need to code inside the ESP, and maybe also whatever ECU that handles the speeder pedal, as those two items seems to be the only thing that is affected by having the sports button turned on. A more firm steering wheel and a increased pedal responsiveness.
Thanks to anyone who replies
if you have an arduino interface and you can share a usb, i can try. On my MD1 ... ECU I was successful ( working on MD1..., EDC 17C10/60, VD46)
Hello,
My VP1 is not looking too great. I think it needs a calibration or something. Beside that, the area is not loading while i’m moving around. Why is that?
Does anyone have a calibration for c4 cactus, please? Thanks
—————
Mon VP1 n'a pas l'air très bien. Je pense qu'il a besoin d'une calibration ou quelque chose comme ça. En plus de cela, la zone ne se charge pas lorsque je me déplace.
Est-ce que quelqu'un a une calibration pour c4 cactus, s'il vous plaît ? Merci
up. Thank you!
If i enter
>764:664
i get: 000000
1003
I get: 000000
baud is 115200 & New line
This didnt happen to me before. Whats the issue?
>764:664
i get: 000000
1003
I get: 000000
baud is 115200 & New line
This didnt happen to me before. Whats the issue?
ok apparently it was the USB port. And for the issue above, i observed that any change in zone 212A does not affect the camera view. For instance, i changed the first parameter value (X axis camera pos) from 3887 to 3587 and there was no change. Or the 2 select input from "Bottom" to "Top".
VLud said in a comment somewhere that some value is cached and in order to reset it, zone 012A must be re-written in a certain way (00 -> reset nac -> 01 -> reset -> observe changes). Here's the list of commands and their response and the write operation didn't work
Edit: i wanted to write : D91C:03:03 in this photo**
Dernière édition:
Hello I bought a 3008 counter I want to install it on my peugeot 208 can you tell me if there are any changes to be made thank you very muchBSI N03
willbe fitted into my 208Gti
hello I have a 3008 counter the same as yours can you tell me how to activate it is plug and play? thank youwillbe fitted into my 208Gti
Hello. First thanks for your work. I have changed my smeg for a Nac wave 2 without BTA. I'm trying to code it. In Diagbox I get the following errors U18A1 and B1506. What area should I change to make the errors disappear? I'm trying to find the solution but I can't find it. Thanks.
Ensuite clear faults : 14FFFFFF
Voir message de VLud #3882
https://www.forum-peugeot.com/Forum...gbox-via-arduino.121767/page-130#post-2699332
Voir message de VLud #3882
https://www.forum-peugeot.com/Forum...gbox-via-arduino.121767/page-130#post-2699332
Dernière édition:
NAC tries to connect to BTA but it does not exist. I have unchecked everything in the 2130 tab. What can I do so that NAC does not try to connect to the BTA? I have tried disabling internet and smartapp but the error persists.
Discussions similaires
