Hi all, can someone help me please? After i upload the sketch and start the nac.exe after i click on ACCESS NAC nothing happens.
This is my log
< wdt reset
< load 0x4010f000, len 3460, room 16
< tail 4
< chksum 0xcc
< load 0x3fff20b8, len 40, room 4
< tail 4
< chksum 0xc9
< csum 0xc9
< v000448b0
< ~ld
> 00
> >764:664
> 1003
This is my log
< wdt reset
< load 0x4010f000, len 3460, room 16
< tail 4
< chksum 0xcc
< load 0x3fff20b8, len 40, room 4
< tail 4
< chksum 0xc9
< csum 0xc9
< v000448b0
< ~ld
> 00
> >764:664
> 1003