Salut pouvez-vous m'aider à activer l'assistant de feux de route?@Castellano
Merci pour votre retour !
Après avoir lu le 222101, j'obtiens cette réponse 62210104BCDD
Si je comprends bien, j'aurais besoin d'écrire 2E210104B8CD ?
Merci beaucoup
Salut pouvez-vous m'aider à activer l'assistant de feux de route?@Castellano
Merci pour votre retour !
@marcins j'essaie d'activer le HBA, ma valeur sur 222101 est 04BCDD. Je vois que votre valeur est 04.B8.FD. Pouvez-vous m'aider s'il vous plaît comment puis-je activer le HBA?04.B8.FD. with hba active
Merci pour l’info! Mais même si j’essaie d’activer un stationnement par l’écran tactile, il ne se passe rien.Une piste de recherche : avec le NAC, le bouton park assist n'existe plus. C'est le cas sur ma nouvelle 308. Mon ancienne en SMEG avait un bouton présent, la nouvelle avec nac n'a plus de bouton.
@marcins To make a cable like this I should buy a OBD Y cable, remove on one of the double connectors all wires except the two of H and L can to connect them to arduino or buy a simple extender and exclude H and L can from one connector in order to connect them to arduino? ThanksGet the Y obd2 cable connect booth diagbox and arduino and you can then log all data what you read with diagbox
Si quelqu’un sur Strasbourg peut me donner un coup de main, je lui serai très reconnaissant. Sinon si quelqu’un a une idée du problème…Merci pour l’info! Mais même si j’essaie d’activer un stationnement par l’écran tactile, il ne se passe rien.
that's ecu specyfic , depend what other option you have here@marcins j'essaie d'activer le HBA, ma valeur sur 222101 est 04BCDD. Je vois que votre valeur est 04.B8.FD. Pouvez-vous m'aider s'il vous plaît comment puis-je activer le HBA?
@marcins i'm trying to activate HBA, my value on 222101 is 04BCDD. I see that your value is 04.B8.FD. Can you help me please how can i activatethe HBA?
Thank you very much for your response....do you mean the option on my car? I have lane assist, blind spot sensor,that's ecu specyfic , depend what other option you have here
just plain Y obd cable or if you familiar with soldering you can make your own@marcins To make a cable like this I should buy a OBD Y cable, remove on one of the double connectors all wires except the two of H and L can to connect them to arduino or buy a simple extender and exclude H and L can from one connector in order to connect them to arduino? Thanks
post here your 2101 zoneThank you very much for your response....do you mean the option on my car? I have lane assist, blind spot sensor,
After i enter >764:664, 222101 i received 62210100post here your 2101 zone
if you reading config zone from cam using ID for nac/rcc/telematics please abandon this project as you make just trouble.. for yourself. study github (read it few times and maybe you understand).After i enter >764:664, 222101 i received 62210100
If i understand correctly i need to read the config zone for CVM >74A:64A and for the zone 2101 i receive 62210104BCDD. That what i told earlier. After that you asked me for the zone 2101 zone and i was confused if you asking me for the nac or the cvm because i already posted the result for 2101 in CVM wich is 62210104BCDDif you reading config zone from cam using ID for nac/rcc/telematics please abandon this project as you make just trouble.. for yourself. study github (read it few times and maybe you understand).
2e210104B8DD this is your config + active HBA
if you reading config zone from cam using ID for nac/rcc/telematics please abandon this project as you make just trouble.. for yourself. study github (read it few times and maybe you understand).
2e210104B8DD this is your config + active HBA
Thank you so for the CVM unlock the code is :E2E5:83:C0Before write zone need to unlock ECU
https://github.com/ludwig-v/arduino-psa-diag#easy-unlock
Thank you @marcins for your help...really i see that i need to add the code 2E2901FD000000010101 to avoid B1003 DTC error in the ECUplease read few time github and try to understand , don't base of someone confirmation as someone can say yes just for a joke and you can damage ecu , not with this frame but with some else...
missing tracablility frame at the end of coding.. again read github
@marcins . Thank you very much for letting me to understand and to learn it on my own wayNo is not ok , looks like you din't read properly if you try to unlock UDS ecu with KWP frame
will send you over the weekendHello,
does any one have configuration for c5 aircross cirocco?