1) The LVDS cable is the same
2) You don't need a separate token for this you can read your SMEG config and current NAC config using the VIN you will use for telecoding directly - similar to your car - (you can find them at the end of the tutorial).
Once you have the donor car VIN you can check services status on Services-Store (use the FR or UK website to subscribe)
3) In the list at the end of the tutorial it is the multifunction camera you must avoid. Concerning the matrix if it is not written "SANS MATRICE COULEUR" the VIN has the colour matrix.
All Wave2 NACs support Android Auto and Carplay (so as far as you are not choosing a VIN in "Active" finish for configuration you are fine)
If you use a 180° VIN without replacing the camera, left and right will be reversed (and it is really annoying and dangerous when you are used to the camera)
2) You don't need a separate token for this you can read your SMEG config and current NAC config using the VIN you will use for telecoding directly - similar to your car - (you can find them at the end of the tutorial).
Once you have the donor car VIN you can check services status on Services-Store (use the FR or UK website to subscribe)
3) In the list at the end of the tutorial it is the multifunction camera you must avoid. Concerning the matrix if it is not written "SANS MATRICE COULEUR" the VIN has the colour matrix.
All Wave2 NACs support Android Auto and Carplay (so as far as you are not choosing a VIN in "Active" finish for configuration you are fine)
If you use a 180° VIN without replacing the camera, left and right will be reversed (and it is really annoying and dangerous when you are used to the camera)
Dernière édition: