ah ok merci je savais pas
l'accès est compliquer pour le démontage ?
bonjour
je souhaite installer un Focal ibus 2,0 sur mon NAC pour améliorer la qualité du son d'origine ( sans remplacer les HP )qui est assez médiocre il faut l'avouer
conseil vu sur un forum alim à partir de la boite a fusible et ampli sous le siège
par contre quel faisceau acheter compatible avec le NAC
merci
merci je pensais que le démontage était valable pour un SMEG et non pas le NAC
au démontage effectivement j'ai trouvé bizarre de ne voir aucun faisceau !!!
je vais voir si l'accès juste en démontant l'écran est possible pour raccorder mon câble mais ça m'étonne
de manière a installer mon câble usb via la boite a gant
You mean this brown?
Today i tried to go for 20minuts trip to check again if longer time will allow BTA to provide internet to NAC but without luck.
I checked cable conectivity for all 4 pins and was ok.
But i found very interesting thing. BTA start to provide connected services access only if I disconnected and connected USB cable when car was running. After this "hack" and around 1 additional minut NAC was showing access to traffic information. I tried this three times and it worked evey time when i try it.
Any idea why it is working only in this way?
My application MyDS App has stopped connecting to the smartphone.
I wrote to the DS support service and received the answer:
Merci de vous assurer que le mode privé de votre écran tactile est bien désactivé. Si le mode privé est activé, vos trajets ne pourront pas être remontés dans l’application.
Can anyone tell me how to change this mode?
Bonsoir à tous !
Et merci à VLUD qui m’a était d’une grande aide pour tout démonter et remonter le NAC.
J’ai une 308 active société de 2015 avec un smeg . J’ai monter un NAC acheter sur le bon coin , aucun soucis particulier, tout fonctionne sauf ... l’ordinateur de bord .. je m’explique :
J’ai un compteur monochrome, je n’ai donc aucune info entre les deux compteur , si ces n’est la vitesse , kilométrage, et passage de rapport .
et là lorsque j’appuie sur le comodo rien ne ce passe ...
Première question : si je met un compteur équiper d’une matrice couleur , vais-je avoir l’ordinateur de bord au milieu des deux compteur ?
si non est-il possible de rajouter cette « options » à mon nac via un telecodage ?
J’ai vu que en 2018 une personne ici a réussi à avoir l’options en remontant le smeg , attendre 10 min et remettre le nac .. je vois pas ce que sa a comme influence sur le codage ...
merci à tous encore
It is only valid for Wave 3 or Wave 4, Wave 2 does not have any Private mode.
1) Oui, et aussi le report des informations GPS etc
2) Oui aussi, il faut télécoder en utilisant un VIN sans matrice (mais c'est déjà indiqué dans le tuto)
Impossible d'avoir l'option "par magie", à choisir j'installerais un combiné avec matrice couleur (mais c'est toi qui choisit)
exactly the same problem.
found a solution?
I can't send to you private message so I will ask here.
Do you have original/factory BTA in your car and you just swaped SMEG to NAC? (In my case i have BTA2 from beginning).
If you added BTA did you buyed it from same donor car as NAC or from different car?
Ok, so most probably it must be in pair with NAC from donor car to make it working as a internet provider for NAC...
I didnt try but i checked all parameters for BTA and looks almost the same.
1) The LVDS cable is the same
2) You don't need a separate token for this you can read your SMEG config and current NAC config using the VIN you will use for telecoding directly - similar to your car - (you can find them at the end of the tutorial).
Once you have the donor car VIN you can check services status on Services-Store (use the FR or UK website to subscribe)
3) In the list at the end of the tutorial it is the multifunction camera you must avoid. Concerning the matrix if it is not written "SANS MATRICE COULEUR" the VIN has the colour matrix.
All Wave2 NACs support Android Auto and Carplay (so as far as you are not choosing a VIN in "Active" finish for configuration you are fine)
If you use a 180° VIN without replacing the camera, left and right will be reversed (and it is really annoying and dangerous when you are used to the camera)