Hello,
The reversing camera has been mounted and activated, however the image on the central monitor is somehow interference
The videos are uploaded under the link below, it is the last conversation.
https://www.forum-peugeot.com/Forum/threads/tuto-remplacer-la-caméra-de-recul-130°-par-la-caméra-panoramique-180°-visiopark-1-sur-308.111402/page-2
Any idea what went wrong during instalation/wiring?
Might be the camera defect?
EDIT 1: camera itself is OK, tested on other car
EDIT 2: Might be caused this kind of behavior by taking the 12V (+) from the reverse light?
I am not sure how they did it, my 3008 had to stay over the night at dealer
VERIFIED, POWER SUPPLY TAKEN FROM BSI.
EDIT 3: Feedback from service is still bad. They did the connection of camera and RCC unit via delivered harness , harness wasn´t mounted in car, the current (+12V) has been taken from BSI not from reversing light. Result - image is still flickering and rotating. They were not possible to fix it.
From their point of view the RCC unit is not capable to operate with the signal from reversing camera. I don´t know how to verify this statement at all.
Any idea how to fix this image issue ?
What do you think about the wire harness necessity
98 210 182 80 (approx. 25cm lenght cable with ferit core in the midle) which is mounted/connected to the camera in cars with reversing camera out of factory ?
Can somebody help me with this please?